ZT-2060 – Wireless 6-channel Isolated Digital Input and 4-channel Relay Output Module

ZT-2060 – Wireless 6-channel Isolated Digital Input and 4-channel Relay Output Module


Datasheet, Manual e Outros

Datasheet, Manual e Outros

REF: ZT-2060 Categoria: Tags: , , , , , , , , ,
  • Descrição
  • Informação adicional
  • Introduction
  • Specifications
  • Ordering information
  • Accessories


Wireless 6-channel Isolated Digital Input and 4-channel Relay Output Module

  • ISM 2.4 GHz Operating Frequency
  • Fully Compliant with 2.4G IEEE 802.15.4/ZigBee Specifications
  • Wireless Transmission Range up to 700 m (Default)
  • Adjustable RF Transmission Output Power
  • GUI Configuration Software (Windows Version)
  • Supports AES-128 Encryption for the Wireless Communication (Passive)
  • Supports ZigBee Repeater Function
  • 6 Digital Input Channels and 4 Relay Output Channels
  • All Channels Can Be Used As 16-bit Counters
  • ESD and Surge Protection
  • Configurable Power-on Value and Safe Value Settings
  • DIN-Rail Mountable

Informação adicional



The ZT-2060 offers 4 Form A power relay output channels and 6 digital input channels, each of which features photocouple isolation. In addition, you can choose sink-type or source-type input via wire connections. Digital input channels are able to be used as 16-bit counters and Relay channels are options for configuring power-on and safe digital output values The ZT-2060 has 10 LED indicators to display the channel status, and has 4 kV ESD protection and 3000 VDC intra-module isolation. Users can easily configure the module address, protocol, checksum, ZB-PID and ZB-channel settings using a combination of rotary and DIP switches.

Digital Input
Input Channels 6
Types Wet Contact (Sink/Source)
On Voltage Level +3.5 VDC ~ +30 VDC
Off Voltage Level +1 VDC Max.
Input Impedance 3 kΩ, 0.33 W
Counter Channels 6
Max. Count 16-bit (65535)
Max. Input Frequency 100 Hz
Min. Pulse Width 5 ms
Relay Output
Output Channels 4
Types Power Relay, Form A (SPST N.O)
Operating Voltage Range 250 VAC or 30 VDC
Max. Load Current 5 A
Operate Time 10 ms
Release Time 5 ms
Mechanical Endurance 2 x 107 ops at no load (300 ops/minute)
Electrical Endurance 105 ops
Surge Strength 3000 VDC
Power-on Value Yes, Programmable
Safe Value Yes, Programmable

Communication Interface
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Max. Slaves in a ZigBee Network 255
Protocols Supports DCON and Modbus RTU Protocols
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
Hot Swap Rotary and DIP switch
LED Indicators
Power 1 LED, Red
ZigBee Communication 1 LED, Green
Digital Input and Output 6 Green LEDs for Digital Input
4 Red LEDs for Relay Output
Intra-module Isolated,
2500 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for Power Line, Communication Line
and each Channel, 8 kV Air for Random Point
EFT (IEC 61000-4-4) 4 kV for Power Line
Surge (IEC 61000-4-5) 3 kv for Power Line
Input Voltage Range +10 VDC ~ +30 VDC
Power Consumption 1.4 W Max.
Flammability Fire Retardant Materials (UL94-V0 Level)
Dimensions (L x W x H) 94 mm x 33 mm x 110 mm
Installation DIN-Rail
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Relative Humidity 10 ~ 90% RH, Non-condensing
ZT-2060 CR Wireless 6-channel Isolated Digital Input and 4-channel Relay Output Module (RoHS)
Important Note: ZigBee Data Acquisition modules need a ZigBee host converter to coordinate the data transmission route. Please remember to order a ZT-2550 or ZT-2570 ZigBee host converter when you purchase ZigBee Data Acquisition Products.
MDR-20-24 24 VDC/1.0 A, 24 W Power Supply with DIN-Rail Mounting
ZT-2510 CR ZigBee Repeater (RoHS)
ZT-2550 CR RS-485/RS-232 to ZigBee Converter (Host)
ZT-2570 CR Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (RoHS)
External Antenna 2.4GHz External Antenna, RP SMA Male (Plug)
Extension Cable 3S00x-1, RG58A/U x Meter Long RP-SMA male to RP-SMA Female