ZT-2053 – Wireless 14-channel Isolated Digital Input Module

ZT-2053 – Wireless 14-channel Isolated Digital Input Module

Marcas:

Datasheet, Manual e Outros

Datasheet, Manual e Outros

REF: ZT-2053 Categoria: Tags: , , , , , ,
  • Descrição
  • Informação adicional
  • Introduction
  • Specifications
  • Ordering information
  • Accessories

Descrição

  • ISM 2.4 GHz Operating Frequency
  • Fully Compliant with 2.4G /ZigBee Specifications
  • Wireless Transmission Range up to 700 m (Default)
  • Adjustable RF Transmission Output Power
  • GUI Configuration Software (Windows Version)
  • Supports AES-128 Encryption for the Wireless Communication (Passive)
  • Supports ZigBee Repeater Function
  • 14 Dry or Wet Contact Digital Input Channels
  • Supports 16-bit Counters for Digital Input Channels
  • Surge and ESD Protection
  • DIN-Rail Mountable

Informação adicional

Modelos

ZT-2053

The ZT-2053 offers 14 digital input channels which can be used for either dry or wet contact. Its effective distance for dry contact is up to 500 meters. All channels are able to be used as 16-bit counters. The ZT-2053 includes 14 LED indicators to display the channel status as well as 4 kV ESD protection and 3750 Vrms intra-module isolation. Users can easily to configure the module address, protocol, checksum, ZB-PID and ZB-channel settings using a combination of rotary and DIP switches.

Digital Input
Input Channels 14
Dry Contact (Sink) On Voltage Level: Close to GND
Off Voltage Level: Open
Effective Distance for Dry Contact: 500 m Max.
Wet Contact (Sink/Source) On Voltage Level: +3.5 VDC ~ +30 VDC
Off Voltage Level: +1 VDC Max.
Input Impedance 3 kΩ, 0.33 W
Counter Channels: 14
Max. Count: 16-bit (65535)
Max. Input Frequency: 100 Hz
Min. Pulse Width: 5 ms

Communication Interface
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated) ( Max 19 dBm)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Max. Slaves in a ZigBee Network 255
ZB-100R/ZB-100T Support -
Protocols Supports DCON and Modbus RTU Protocols
Hot Swap Rotary and DIP switch
LED Indicators
Power 1 LED, Red
ZigBee Communication 1 LED, Green
Digital Input 14 LEDs, green
Isolation
Intra-module Isolated,
Field-to-Logic
3750 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for Power Line, Communication Line
and each Channel, 8 kV Air for Random Point
EFT (IEC 61000-4-4) 4 kV for Power
Surge ( IEC 61000-4-5) 3 kV for Power
Power
Input Voltage Range +10 VDC ~ +30 VDC
Power Consumption 0.72 W Max.
Mechanical
Flammability Fire Retardant Materials (UL94-V0 Level)
Dimensions (W x L x H) 33 mm x 87 mm x 107 mm
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Relative Humidity 10 ~ 90% RH, Non-condensing
ZT-2053 CR Wireless 14-channel Isolated Digital Input Module (RoHS) (Long Range)
Important Note: Zigbee Data Acquisition modules need a Zigbee host converter to coordinate the data transmission route. Please remember to order a ZT-2550, ZT-2570 ZigBee host converter when you purchase Zigbee Data Acquisition products.
MDR-20-24 24 VDC/1.0 A, 24 W Power Supply with DIN-Rail Mounting
ZT-2510 CR ZigBee Repeater (RoHS)
ZT-2550 CR RS-485/RS-232 to ZigBee Converter (Host)
ZT-2570 CR Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (RoHS)
External Antenna 2.4GHz External Antenna, RP SMA Male (Plug)
Extension Cable 3S00x-1, RG58A/U x Meter Long RP-SMA male to RP-SMA Female

Você também pode gostar de…