PISO-ENCODER300U – PCl Bus, 3-axis Encoder Input Card

PISO-ENCODER300U – PCl Bus, 3-axis Encoder Input Card

Marcas:

Datasheet, Manual e Outros

Categoria Tags: , , ,
  • Descrição
  • Introduction
  • Specifications
  • Ordering Information
  • Accessories

Descrição

  • Universal PCI Bus
  • 3-axis encoder counter
  • True 32-bit counter
  • Maximum Counting Rate: 1 MHz
  • Third-order internal digital filter
  • Counting Mode: Quadrant, CW/CCW, PULSE/DIR
  • A+, A-, B+, B-, C+, C- inputs
  • Programmable reset counter function
  • Index (C channel) reset counter function
  • Hardware reset (HR1 ~ HR6), reset counter function
  • 68-pin SCSI-II connector
The PISO-ENCODER300U contains a 3-axis encoder counter and each axis has a 32-bit, true counter with a maximum counting rate of 1 MHz. The counting mode can be selected from three types: 1. Quadrant mode, 2. CW/CCW mode, and 3. PULSE/DIR mode. There are also three 3 kinds of counter reset modes provided: 1. Register Reset, 2. Index Reset, and 3. Hardware Reset. The "Index Reset" mode resets by using a C+/C- channel, which will reset the counter on each revolution. The "Hardware Reset" mode resets the counter using an external pin (HR1 ~ HR6). The HR1 ~ HR6 pins can also be used as digital input.

The PISO-ENCODER300U also provides 8-ch digital outputs. 2500 Vrms photo-couplers are used to isolate the digital I/O to prevent high voltages from affecting the system. Device drivers and function libraries for DOS, Windows 7 and Windows XP/2000 are provided.

Number of Axes3
Slot InterfaceUniversal PCI bus
Resolution32-bit
Pulse Output ModeQuadrant, CW/CCW, PULSE/DIR
Maximum Counting Rate1 MHz
Digital Output Channels8
I/O Isolation2500 Vrms optical isolation
Connector68-pin SCSI-II female connector
Power Consumption+5 V @ 500 mA
Environmental
Operating Temperature0 ~ +60°C
Storage Temperature-20 ~ +80°C
Ambient Relative Humidity0 ~ 90% RH, non-condensing
Dimensions120.4 mm x 90.8 mm
Software Support
Windows Driver/DLL/LibWindows 7 32/64-bit
Windows XP/2000 32-bit
DOS LibraryDOS 6.2
Labview Development KitLabview 8.5 and above
Linux Library-
PISO-ENCODER300U CRUniversal PCI Bus, 3-axis Encoder Input Card (RoHS)
Includes: CA-SC68, SCSI-II 68-pin Male Connector (Solder Type) with Cover
DN-68 CREncoder Input Board for PISO-ENCODER300U / PISO-ENCODER600U