CAN-2088D – DeviceNet Slave Module of 8-Channel PWM and 8-Channel High Speed Counter

CAN-2088D – DeviceNet Slave Module of 8-Channel PWM and 8-Channel High Speed Counter

Marcas:

Datasheet, Manual e Outros

REF: CAN-2088D Categoria: Tags: , , , , , , , , , , , , ,
  • Descrição
  • Informação adicional
  • Applications
  • Hardware Spec
  • Ordering Info
  • Optional Accessories
  • Related Products

Descrição

PWM (Pulse width modulation) is a powerful technique for controlling analog circuits. It uses digital outputs to generate a waveform with variant duty cycle and frequency to control analog circuits. CAN-2088D is a PWM slave module of DeviceNet protocol. It has 8 PWM output channels and 8 high speed counter channels. It can be used to develop powerful and cost effective analog control system.

Informação adicional

Modelos

CAN-2088D

  • Controlling the position/speed of motors
  • Dimming the brightness of lamps
  • Controlling the speed of fans
  • High speed counter

DeviceNet Interface
DeviceNet Specification
Volume I, Release 2.0 & Volume II, Release 2.0, Errata5
DeviceNet subscribe
Group 2 Only Server
Connection supported
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O
Baud Rate Setting by Rotary Switch
125 kbps, 250 kbps, 500 kbps
Node ID Setting by Rotary Switch
0 ~ 63
Heartbeat message
Yes
Shutdown message
Yes
Terminator Resistor
Switch for 120 Ω terminator resistor
Connector
5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file
Yes
LED
PWR/NET/MOD
PWM
Channels
8 (Source)
Output Max. Load Current
1 mA
Frequency
0.2 ~ 500 kHz (non-continuous)
Scaling Resolution
16-bit (1 ~ 128 μs for each step)
Duty Cycle
0.1 ~ 99.9 %
PWM Mode
Burst mode, Continuous mode
Burst mode counter
1~65535 counts
Trigger Mode
Hardware (Start and Stop) or Software (Start and Stop)
Intra-module Isolation
3750 Vrms
ESD Protection
4 kV Contact for each channel
Digital Input
Channels
8 (Sink/Source)
ON Voltage Level
+5.5 ~ +30 V
OFF Voltage Level
<3.5 V
Counter Frequency
500 kHz max.
Max. Counts
32-bits (4,294,967,295)
Input Impedance
4.7 kΩ, 1/4 W
Intra-module Isolation
3750 Vrms
ESD Protection
4 kV Contact for each channel
LED
DeviceNet Status
3 LEDs for PWR/NET/MOD
Terminal Resister
1 LED as Terminal Resister indicators
PWM LED
8 LEDs as PWM Output indicators
DI LED
8 LEDs as Digital Input indicators
Power
Power Supply
Unregulated +10 ~ +30 VDC
Power Consumption
2 W
Mechanism
Installation
DIN-Rail
Dimensions
32.3 mm x 99 mm x 77.5 mm ( W x L x H )
Environment
Operating Temp.
-25 ~ +75 ℃
Storage Temp.
-30 ~ +80 ℃
Humidity
10 ~ 90% RH, non-condensing
CAN-2088D
DeviceNet module of 8-channel PWM and 8-channel High Speed Counter
8-channel Digital Output and 8-channel Counter Input Board, including DB-8820 Daughterboard and a CA-2520D Cable.
DeivceNet Master Library Support PISO-CAN serials, PEX-CAN serials and PCM-CAN with DeviceNet master library
PISO-DNM100U-D
PISO-DNM100U-T
1 Port Intelligent DeviceNet Master Communication Board with DeviceNet Firmware Inside for universal PCI bus
I-7565-DNM-G CR USB/DeviceNet Master communication Converter with D-sub 9-pin connector
I-8124W 1 Port DeviceNet Master Module with dual port RAM
I-87124 1 Port High Performance DeviceNet Master Module
CA-0910-C 9-pin Female D-sub & 3-wire CAN bus cable (1M)