CAN-2017D – DeviceNet Slave Module of 8-channel differential analog Input

CAN-2017D – DeviceNet Slave Module of 8-channel differential analog Input

Marcas:

Datasheet, Manual e Outros

Datasheet, Manual e Outros

REF: CAN-2017D Categoria: Tags: , , , , , , , , , , , ,
  • Descrição
  • Informação adicional
  • Applications
  • Hardware Spec
  • Ordering Info
  • Related Products

Descrição

DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for the embedded network of the machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc. The CAN-2017D follows DeviceNet specification Volume I/II, Release 2.0. User can access the analog input status and set the configuration via DeviceNet EDS file. CAN-2017D has 8-channel analog input and it can be used to various applications. By the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements. For more information about the DeviceNet master interfaces and other DeviceNet products, please refer to the following web site.

Informação adicional

Modelos

CAN-2017D

DeviceNet Interface
DeviceNet Specification Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5
DeviceNet subscribe Group 2 Only Server
Connection supported 1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O
Node ID 0~63 selected by rotary switch
Baud Rate (bps) 125 kbps, 250 kbps, 500 kbps
Terminator Resistor Switch for 120 Ω terminator resistor
Connector 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file Yes
Analog Input
Channels 8
Input Type ±10V, ±5V, ±1V, ±500mV, ±150mV, ±20mA,( External 125 Ohm Resistor Required)
Resolution 16-bit
Sampling Rate 10 Samples/Sec. (Total)
Accuracy ±0.1% FSR
Zero Drift ±10 μV/ °C
Span Drift ±25 ppm/ °C
Common Mode Rejection 86 dB
Normal Mode Rejection 100 dB
Input Impedance >2 MΩ
Individual Channel Configuration Yes
Over voltage Protection 240 Vrms
ESD Protection ±4kV, Contact for each terminal
Intra-module Isolation, Field to Logic 3000 VDC
LED
Status LED PWR LED, NET LED, MOD LED
Terminal Resister LED 1 LED as terminal resister Indicator
Alarm LED 8 LEDs as over Upper Limit Indicators
8 LEDs as under the Lower Limit Indicators
Power
Power Supply Unregulated +10 ~ +30 VDC
Power Consumption 2.0 W
Mechanism
Installation DIN-Rail
Dimensions 33 mm x 99 mm x 78 mm ( W x L x H )
Environment
Operating Temp. -25 ~ 75 ℃
Storage Temp. -30 ~ 80 ℃
Humidity 10 ~ 90% RH, non-condensing
CAN-2017D
DeviceNet Slave Module of 8-channel Differential Analog Input
DeivceNet Master Library Support PISO-CAN serials, PEX-CAN serials and PCM-CAN with DeviceNet master library
PISO-DNM100U-D
PISO-DNM100U-T
1 Port Intelligent DeviceNet Master Communication Board with DeviceNet Firmware Inside for universal PCI bus
I-7565-DNM-G CR USB/DeviceNet Master communication Converter with D-sub 9-pin connector
I-8124W 1 Port DeviceNet Master Module with dual port RAM
I-87124 1 Port High Performance DeviceNet Master Module
CA-0910-C 9-pin Female D-sub & 3-wire CAN bus cable (1M)