ET-7026 Módulo Ethernet Modbus TCP/UDP 6 Entradas e 2 Saídas Analógicas ICP Das
Ref: ET-7026
Marca: ICP Das
Modelo: ET-7026
Área: Aquisição de Dados
Característica: Modbus TCP/UDP
Interface: Ethernet
Descrição
Características
Garantia
Avaliações
Mais Informações
Descrição
O ET-7026 é um módulo para aquisição de dados multifuncional, com 6 canais analógico de entrada, 2 canais analógico de saída e digital 2 entradas e 2 saídas. Várias opções para faixa de entrada(+/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA e 4 ~ 20 mA), e também para saída(+/-5 V, +/-10 V, 0 ~ 20 mA e 4 ~ 20 mA). Faixa de entrada analógica configurada independente com proteção de 240Vrms. Também cada entrada/saída analógica podem ser programadas para aceitar corrente ou tensão, de acordo com a posição do jumper.
Características
- Módulo Aquisição de Dados Analógico Ethernet
- Protocolo de comunicação Modbus TCP/UDP
- Incorpora Web Server para fácil configuração, monitoração e controle
- Função HMI via Web: páginas WEB dinâmicas para monitorar e controlar os sinais
- Função Conexão ao Pares dos sinais, entre módulos com entradas e saídas analógicas
- Interface de comunicação Ethernet 1x 10/100Base-Tx, RJ45
- Sinais entrada e saída:
> 6 Entras Diferencial Analógica
> 2 Saídas Analógica
> 2 Entradas/Contador Digital
> 2 Saídas Digital - Alimentação 10 ~ 30Vdc
- Fixação trilho DIN
- Temperatura de operação -25 ~ 75ºC
- Área: Aquisição de Dados
- Característica: Modbus TCP/UDP
- Interface: Ethernet
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
|---|---|
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
|---|---|
| 2-way Isolation | Ethernet: 1500 VDC I/O: 2500 VDC |
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
|---|---|
| Status | Run, Ethernet |
| Analog Input | |
|---|---|
| Channels | 6 (Differential) |
| Type | Voltage Current |
| Range | ±500 mV, ±1V, ±5 V, ±10 V 0 to 20 mA, ±20 mA, 4 to 20 mA (Jumper Selectable) |
| Resolution | 16-bit |
| Accuracy | Normal Mode: ±0.1% Fast Mode: ±0.5% or better |
| Sampling Rate | Normal Mode: 10 Hz (total channels) Fast Mode: 50 Hz (total channels) |
| Input Impedance | Voltage: 2 MΩ Current: 125 Ω |
| Common Voltage Protection | ±200 VDC |
| Overvoltage Protection | 240 Vrms |
| Overcurrent Protection | 50 mA @ 110 VDC (max.) |
| Individual Channel Configuration | Yes |
| Open Wire Detection | For 4 to 20 mA only |
| Isolation | ±400 VDC, Virtual Channel to Channel Isolation |
| Analog Output | |
|---|---|
| Channels | 2 |
| Type | Voltage Current |
| Range | +0 to +5 VDC, ±5 VDC, +0 to +10 VDC, ±10 VDC 0 to 20 mA, 4 to 20 mA (Jumper Selectable) |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Open Wire Detection | For 4 to 20 mA only |
| Voltage Output Capability | 10 V @ 20 mA |
| Current Load Resistance | 500 Ω |
| Individual Channel Configuration | Yes |
| Power-on Value | Programmable |
| Safe Value | Programmable |
| Digital Input/Counter | |
|---|---|
| Channels | 2 |
| Type | Dry Contact Wet Contact |
| ON Voltage Level | Dry: Close to GND Wet: +1 VDC (max.) |
| OFF Voltage Level | Dry: Open Wet: +3.5 to +30 VDC |
| Max. Counts | 4,294,967,295 (32-bit) |
| Frequency | 100 Hz |
| Min. Pulse Width | 5 ms |
| Effective Distance | 500m (max.) |
| Overvoltage Protection | +30 VDC |
| Digital Output | |
|---|---|
| Channels | 2 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 to +50 VDC |
| Load Current | 700 mA/channel |
| Overvoltage Protection | +60 VDC |
| Overload Protection | 1.4 A |
| Short-circuit Protection | Yes |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
|---|---|
| Ports | 1 x RJ-45, 10/100 Base-TX |
| Security | ID, Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Consumption | 3.6 W (max.) |
| Powered from Terminal Block | +10 to +30 VDC |
| Mechanical | |
|---|---|
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 to 90% RH, Non-condensing |
